Products by Application | WAKO ELECTRONICS, a leading manufacturer of Thermostats, Thermal Sensors, and Pressure Switches

• Household appliances
• Kitchen appliances
• Air-conditioning equipment
• Home equipment
• Office automation equipment

• Gas equipment
• Automotive / hydraulic equipment
• Automotive air conditioner
• Others

---

Household appliances

Dish washer	CS-7 Show Details Versatile thermostat designed to be used with current from microcurrent to high-current, enabling you to specify the temperature from low temperature to high temperature.

Vacuum cleaner	CR-7 Show Details Manual reset type does not allow it to be automatically reset at room temperature once it has functioned. It can be reset by pressing RESET button.

Kitchen garbage processor	B-1, HB-1 Show Details The design is dedicated to one shot. It is available for applications in a wide temperature range from low temperature to high temperature and can be used mainly in substitution of thermal cut-off.

Iron	B-1, HB-1 Show Details The design is dedicated to one shot. It is available for applications in a wide temperature range from low temperature to high temperature and can be used mainly in substitution of thermal cut-off.

Hair iron	CB-3 Show Details Ultra compact, high temperature, one shot type thermostat designed as small as thermal cut-off.

Steam valve of steam iron	Actuator Show Details Repurposed version of the temperature sensing element used in a thermostat, in the shape to match each application.

Clothes dryer	CS-17 Show Details Large capacity type designed in a miniature size (1/2-inch size). With excellent thermal response, it can be installed in a small space.
	B-2, CS-7TA-35 Show Details This type is commonly used for prevention of excessive temperature rise in the office automation equipment. Especially, it is featured by an excellent thermal response when non-contact type is used.
	CH-152-35 Show Details Ceramic body version of B-2 and CS-7TA-35. Despite its excellent thermal response, it is suitable for use in high temperature atmosphere.
	Thermistor Assemblies Show Details Thermal sensor with general NTC thermistor enclosed in a casing in shape easy-to use to match each application.

Drinking water dispenser	CR-7 Show Details Manual reset type does not allow it to be automatically reset at room temperature once it has functioned. It can be reset by pressing RESET button.
	CH-15, CH-152 Show Details Ceramic body; which provides excellent heat resistance. Suitable for use in high temperature atmosphere.

Humidifier	CS-7 Show Details This type is commonly used for prevention of excessive temperature rise in the office automation equipment. Especially, it is featured by an excellent thermal response when non-contact type is used.
	B-1, HB-1 Show Details The design is dedicated to one shot. It is available for applications in a wide temperature range from low temperature to high temperature and can be used mainly in substitution of thermal cut-off.

Return to Page Top

Kitchen appliances

Microwave oven	CS-7 Show Details This type is commonly used for prevention of excessive temperature rise in the office automation equipment. Especially, it is featured by an excellent thermal response when non-contact type is used.
	CS-8 Show Details Designed for space-saving, it is suitable for applications in a small space insufficient for installation.
	B-1, HB-1 Show Details The design is dedicated to one shot. It is available for applications in a wide temperature range from low temperature to high temperature and can be used mainly in substitution of thermal cut-off.
	B-2, CS-7TA-35 Show Details This type is commonly used for prevention of excessive temperature rise in the office automation equipment. Especially, it is featured by an excellent thermal response when non-contact type is used.

Toaster oven	CS-7 Show Details This type is commonly used for prevention of excessive temperature rise in the office automation equipment. Especially, it is featured by an excellent thermal response when non-contact type is used.

Electric warmer pot	CS-7 Show Details This type is commonly used for prevention of excessive temperature rise in the office automation equipment. Especially, it is featured by an excellent thermal response when non-contact type is used.

Coffeemaker	CH-15, CH-152 Show Details Ceramic body; which provides excellent heat resistance. Suitable for use in high temperature atmosphere.

Large conventional oven	OV-2 Show Details Platinum resistance temperature sensor covered with stainless steel tube. It has temperature sensitivity up to 500°C.

Electric kettle	CH-15, CH-152 Show Details Ceramic body; which provides excellent heat resistance. Suitable for use in high temperature atmosphere.
	CR-7 Show Details Manual reset type does not allow it to be automatically reset at room temperature once it has functioned. It can be reset by pressing RESET button.

Return to Page Top

Air-conditioning equipment

Air conditioner	CS-7 Show Details Versatile thermostat designed to be used with current from microcurrent to high-current, enabling you to specify the temperature from low temperature to high temperature.
	CS-17 Show Details Large capacity type designed in a miniature size (1/2-inch size). With excellent thermal response, it can be installed in a small space.

Industrial air conditioner	CS-1, CR-1 Show Details Being available for use at up to 35A / 250V AC, It can be used to control large appliances and prevent excessive temperature rise in them.

Oil fan heater	CS-7 Show Details Versatile thermostat designed to be used with current from microcurrent to high-current, enabling you to specify the temperature from low temperature to high temperature.
	CS-8 Show Details Designed for space-saving, it is suitable for applications in a small space insufficient for installation.
	CH-15, CH-152 Show Details Ceramic body; which provides excellent heat resistance. Suitable for use in high temperature atmosphere.
	B-1, HB-1 Show Details The design is dedicated to one shot. It is available for applications in a wide temperature range from low temperature to high temperature and can be used mainly in substitution of thermal cut-off.

FF space heater	CS-8 Show Details Designed for space-saving, it is suitable for applications in a small space insufficient for installation.
	B-1, HB-1 Show Details The design is dedicated to one shot. It is available for applications in a wide temperature range from low temperature to high temperature and can be used mainly in substitution of thermal cut-off.

Return to Page Top

Home equipment

Fire-alarm system, Fixed temperature thermal sensor	CS-K4 Show Details Temperature switch designed for a fixed temperature thermal sensor of fire alarms. The best structure for quick air temperature sensing is adopted.

Electric water heater	CS-1, CR-1 Show Details Being available for use at up to 35A / 250V AC, It can be used to control large appliances and prevent excessive temperature rise in them.
	ST-3 Show Details Suitable for surface temperature detection. Low profile design, which allows it to be installed in a narrow space.

Return to Page Top

Office automation equipment

Printer Copier	CR-7 Show Details Manual reset type does not allow it to be automatically reset at room temperature once it has functioned. It can be reset by pressing RESET button.
	CB-3 Show Details Ultra compact, high temperature, one shot type thermostat designed as small as thermal cut-off.
	B-2, CS-7TA-35 Show Details This type is commonly used for prevention of excessive temperature rise in the office automation equipment. Especially, it is featured by an excellent thermal response when non-contact type is used.
	CH-152-35 Show Details Ceramic body version of B-2 and CS-7TA-35. Despite its excellent thermal response, it is suitable for use in high temperature atmosphere.
	CH-16 Show Details With excellent heat resistance and super-excellent thermal response, it is suitable for prevention of excessive temperature rise in the equipment with a very rapid temperature-rise.
	CH-19 Show Details Excellent heat resistance and thermal response derived from the CH-16, but both terminals on one side.

Return to Page Top

Gas appliances

Gas water heater	CS-1, CR-1 Show Details Being available for use at up to 35A / 250V AC, It can be used to control large appliances and prevent excessive temperature rise in them.

Gas grill	CS-7 Show Details Versatile thermostat designed to be used with current from microcurrent to high-current, enabling you to specify the temperature from low temperature to high temperature.

Return to Page Top

Automotive/Hydraulic equipment

Automotive/ Hydraulic equipment Pneumatic equipment	PS-10 Show Details Miniaturized pressure switch for a better design flexibility with respect to the installation space.
	PS-20 series Show Details This is the general-purpose pressure switch for various mediums in wide pressure range.

Return to Page Top

Automotive air conditioner

Automotive air conditioner system	CM-20 Show Details Electronic temperature switch comprised of NTC thermistor and comparator circuit. Most suitable for high precision and tight differential control.
	PS-17 series Show Details This is the pressure switch of the connector all-in-one design designed for installing in compressor and the accumulator.
	Pressure transducer Show Details This is the pressure transducer of the connector all-in-one design designed for automotive air conditioner system. ASIC is adopted for the signal processing.

Automotive air conditioner compressors	CWK-4PB Show Details Compactly designed thermostat for protection of automotive air conditioner compressor from overheating, which provides a better installation flexibility.

Return to Page Top

Others

Slot-vending machine	CR-7 Show Details Manual reset type does not allow it to be automatically reset at room temperature once it has functioned. It can be reset by pressing RESET button.
	ST-3 Show Details Suitable for surface temperature detection. Low profile design, which allows it to be installed in a narrow space.

Sealed container such as secondary battery container	Safety valve Show Details Protective safety valve utilizing a crack open of metal caused by an internal pressure. It is featured by permeation leak free and minute leak free.

Heat treat furnace, Boiler	EX-3 Show Details Thermal sensitive rod type thermostat developed for the purpose of operations at high temperature up to 500°C. It is suitable for applications in harsh environments.

Commercial freezer-refrigerator	CT-7 Show Details Thermostat with water-proof lead for low to medium temperature applications. It is suitable for use in wet areas and anywhere else likely to build up condensation.
	ST-3 Show Details Suitable for surface temperature detection. Low profile design, which allows it to be installed in a narrow space.

Ice maker	CS-7 Show Details Versatile thermostat designed to be used with current from microcurrent to high-current, enabling you to specify the temperature from low temperature to high temperature.
	ST-3 Show Details Suitable for surface temperature detection. Low profile design, which allows it to be installed in a narrow space.

Snow melting machine Anti-freeze system for outside equipment	CT-7 Show Details Thermostat with water-proof lead for low to medium temperature applications. It is suitable for use in wet areas and anywhere else likely to build up condensation.

Projector	CR-7 Show Details Manual reset type does not allow it to be automatically reset at room temperature once it has functioned. It can be reset by pressing RESET button.

Return to Page Top